Keurig DRINKWORKS Home Bar, Руководство по уходу

Страница: 17 / 20

17
Troubleshooting.
What do I do if...
The Home Bar does not recognize a Pod?
If the Home Bar fails to recognize your authentic Drinkworks
Pod, open the Pod door and re-insert the Pod. Make sure the
bar code is at a 12 o’clock position. After two failed attempts to
determine the type of Drinkworks Pod you selected, the Home
Bar will enter an override state. Follow the instructions on the
display and do the following:
1. Open the Pod door by lifting up the handle, and
remove the Pod.
2. Find the Drinkworks Pod type printed on the Pod label.
It will be a capital letter located in a triangle under “Pod
type.”
3. Scroll to the corresponding letter on the display using
the touch arrow buttons.
4. Press START to select the appropriate Pod type.
5. Re-insert the Pod and close the lid.
6. Press START to make your drink.
THIS UNIT NOT LABELED FOR
INDIVIDUAL SALE
PACKED BY DRINKWORKS TM WILLISTON, VT
NON-ALCOHOLIC
1.7 FL OZ MAKES 6.8 FL OZ AS SERVED BY YOUR DRINKMAKER
Bright Lemon Flavor and a Hint of
Muddled Basil
Serve over cubed ice in a highball
glass with a lemon wedge, with or
without gin of your choice.
SWEETNESS
HERBAL CITRUS
NOTES:
PART GEOMETRY CONTROLED BY CAD FILE OF SAME NUMBER. REFER TO GENERAL TOLERANCE BLOCK 1.
TO CONTROL TOLERANCES NOT SHOWN.
PART MUST MEET ALL REQUIREMENTS LISTED IN DESIGN SPECIFICATION #70002554 2.
FLAT PARTS DRAWN OUTSIDE UP. 3.
40000609
BRANDING LABEL, 50ml
M. FANTAUZZI
C
70002556
TITLE
MATERIAL
DRAWN BY
REV PART NUMBER
PANTONE
427C
PANTONE
Cool Gray 6
Black
The Home Bar does not have power?
•
Make sure it is plugged in securely.
•
Make sure the power button has been turned on.
•
Plug it into an independent outlet and/or a different outlet.