Keurig B81, Руководство пользователя

Страница: 6 / 16

6
SECTION 1
Set-Up & First Brew
IMPORTANT:
You cannot use your Keurig ® Brewer until it
has been set up for its first use.
NOTE:
If Brewer has been exposed to temperatures below
freezing, allow Brewer at least two hours to reach room
temperature before brewing. A frozen or extremely cold
Brewer will not operate.
Setting Up Your Brewer
1.
Unwrap cord and plug the Brewer into a
grounded outlet. Remove all pieces of
packing tape and clear plastic sticker
from Touch Screen display.
2.
Place a large mug (10 oz. minimum) on
the Drip Tray Plate.
3.
Remove the Water Reservoir from
Brewer by first removing Lid from the
Water Reservoir (fig. 1), then lifting the
Water Reservoir straight up and to the
left of the Brewer. (may be tight), (fig. 2).
Rinse with fresh water.
4.
Fill Water Reservoir with bottled or
filtered water so that the water level is
just below the MAX fill line of the Water
Reservoir.
5.
Place Water Reservoir base into the left
side of the Brewer and be sure the
Water Reservoir Lock Tab engages with
the Brewer. Replace Lid on Water
Reservoir.
6.
Press and release the Power Button
found directly behind the right side of
the Brewer.
7.
The Touch Screen will come on and
indicate “NOT READY”.
NOTE : A K-Cup should not be used for this
sequence.
8.
The Brewer will automatically fill the
internal tank with water and then the
water will be heated. This will take about
4 minutes. During the heating period,
“NOT READY” (fig. 3) is displayed on
the Touch Screen.
Do not lift Brewer
Handle during this ‘heating period’.
Once the water is heated, “READY TO
BREW” will be displayed and the BREW
Button will be illuminated (fig. 4).
9.
Press the BREW Button to start a
cleansing brew without a K-Cup. Pour
the hot water into the sink.
NOTE :
A K-Cup should not be used for this
Sequence .
10.
The one-time set-up process is now
complete and you are ready to brew!
NOTE : The Brewer may take 15-30 seconds
between brews and then “READY TO
BREW” will be displayed.
Ready to Brew Your First Cup
1.
Touch Screen will indicate “READY TO
BREW”.
2.
Place a cup or mug on the Drip Tray
Plate.
3.
Lift the Handle and the K-Cup® Holder
will open toward you (fig. 5).
4.
Select a K-Cup portion pack.
NOTE : Do not remove
the foil lid or puncture
the K-Cup.