Keurig 2.0 K500, Инструкция по использованию и уходу

Страница: 16 / 23

CARING FOR YOUR BREWER
x
CLEANING THE BREWER
ENTRANCE NEEDLE
Having trouble brewing? You may have
coffee grounds stuck in the brewer’s
Entrance Needle. Use your Brewer
Maintenance Accessory and get back
to brewing in a few quick steps!
NOTE: The Brewer Maintenance Accessory comes with the brewer.
It is an orange tool.
1. Please ensure the brewer is powered off.
With the printed text on your Brewer
Maintenance Accessory facing up, fill
silicon bulb with water.
3. Raise and lower the Handle five times
to loosen and remove any coffee
grounds retained in your brewer’s
Entrance Needle.
2. Lift Handle, properly place Brewer
Maintenance Accessory in Pod Holder
with printed arrows pointing down.
Warning: Avoid sharp needles.
CANCEL
Dispense Hot
Water?
CONTINUE
4. Remove Brewer Maintenance Accessory
from Pod Holder.
Warning: Avoid sharp needles.
5. Once you have removed the Brewer
Maintenance Accessory from the
brewer, power the brewer back on.
7. Brew your favorite Keurig® beverage
and enjoy!
6. Place a 12 ounce mug on the Drip Tray
and perform a cleansing brew (refer
to page 1 1).
If you do not have this
accessory please contact
Keurig customer service at
1.866.901.BREW (2739).
2 | TIPS & MAINTENANCE
30 31