KEUCO Edition 400 21523 171351, Инструкция по эксплуатации

Страница: 4 / 20

4
US
Read all instructions before using or installing this product.
Button functions
Button
Function
Light on/o
ff
• Pressing the button switches the mirror on
with the selected settings. The white LED
goes o
ff .
• Pressing the button again switches the mirror
o ff . The white LED lights up.
• The white LED can be deactivated.
– Switch on the mirror.
– Press and hold the button for 15 seconds.
- The lighting gets lighter or darker.
- The lighting switches o ff brie fl y and the
white LED is deactivated.
To switch the white LED back on, repeat the
described procedure.
Dimming the front, wall and washbasin
lighting
• Press the button when the light mirror is
switched on and hold until the desired bright-
ness or the end value has been reached.
The setting is stored and reproduced when
switched on again.
Setting the light colour cooler
• Press and hold daylight white button and the
light colour fades to cool white.
• Release when the desired light colour has
been reached.
The setting is stored and reproduced when
switched on again.
Adjusting light colour - daylight white (cool
white)
• Press button and the colour temperature sets
to 6500 Kelvin.
Setting the light colour warmer
• Press and hold warm white button and the
light colour fades to warm white.
• Release when the desired light colour has
been reached.
The setting is stored and reproduced when
switched on again.
Adjusting light colour - warm white
• Press button and the colour temperature sets
to 2700 Kelvin.
Replacement parts with order numbers , see page 19.
The light sources may only be replaced by the
manufacturer, its customer service or by an
equally quali
fi ed person.
For information about warranty and mainte-
nance, see the enclosed
Care Instructions
and Warranty Card .
Disposal instructions
This category of device does not belong in
the domestic waste, but must be disposed of
separately in accordance with the relevant
local national regulations.