x1
x3
x1
x3
x3
x1
Leg Connecting Frame -
You will have x1 of the following:
B
C
Hex Plastic Caps
F
Hex Socket Allen Key
G
Washers
D
M6 Nuts
E
Table Legs
I
Table Top -
You will have x1 of the following:
A
Helpful advise before you begin:
1. We suggest you spend a short time reading through this leaflet and then follow the simple step by step instructions.
2. If you follow the instructions carefully the end result should be worth the effort.
3. Do not discard any of the packaging until you have checked that you have all the parts and the pack of fittings.
4. Assemble this product on a soft surface.
5. To ensure an easier assembly, we strongly advise that all fittings are only finger tightened during initial assembly. Only upon completion of the
assembly should all fixing points be fully tightened.
6. Keep fittings out of children’s reach.
7. Do not use any other tools other than those recommended to build this product.
8. Please do not use substitute parts. Use only additional or replacement parts supplied by Kettler.
9. In the unlikely event that this product has missing or damaged parts, please call 866-- 804- 0440 to obtain spares.
Do not discard
any of the
packaging
until you have
checked that
you have all the
parts and the
pack of fixings.
x3
Plastic Washer
H
-
Plastic Washer
x6
x6
