877-00136_1.0_17.09.2018
47
Transportation, storage and assembly
Initial commissioning check list
Check the battery
The battery is supplied partially charged. Fully charge the
battery to ensure full power
Mount the wheels, quick release and pedals.
Re-adjust the quick release clamping force if necessary.
Thoroughly degrease the brake discs in disc brakes or the brake
sides and linings in rim brakes with brake cleaner or spirit.
Place handlebars, stem and saddle in the functional position
and check they are firmly in place.
Check all the components to make sure that they are firmly in
place. Check all the settings and the tightening torque on the
axle nuts.
Check the entire cable harness to make sure that it is routed
properly:
•
You must prevent the cable harness from coming into
contact with moving parts.
•
The cable routes must be smooth and free from sharp edges.
•
Moving parts must not apply any pressure or tension to the
cable harness.
Check the drive system, the light equipment and the brakes to
make sure that they are fully functional and effective.
Adjust the headlight.
Set the drive system has to the national language and the
appropriate system of measurement.
Check the software version of the drive system and update it as
necessary.
Take a test drive to check the brake system, gear shift and the
electric drive system.
