Kettler BTR 300, Руководство по сборке, Страница: 8 / 26

Assembly Instructions
• Connect motor communication wire (10) and
console communication wire (9).
• Attach the upright post (6) to the main frame (1)
with flat washer(34), spring washer (27), Allen
C.K.S. full thread screw(35), curved washer (28),
spring washer(27), Allen C.K.S. full thread screw
(35), Allen C.K.S. full thread screw (36), curved
washer(28) and Hex locking nut (33).
• Attach upright post cover (13) and Upright post
trim strip (46) to the main frame (1).
• Tip: Do not fully tighten the Bolt yet. Make sure
that all screws are in the hexagonal hole.
5
6
Step 6:
Attach handlebar connection
wire (11) to the upright post
(6). Attach handlebar (7) to
the upper upright post (6).
Close handle clamp ring (22)
and lock them with T-shaped
rotary knob (21).
46 13
35
6
9
35
10
35
28
27 34
33
27
1
22
21
11
7
6
Step 5:
• Attach the Upright post trim strip (46) to the Upper upright post (6). Take the
Upright post cover (13) from main frame (1). Then attach to the upper upright
post (6).
28
27 34
28
27
35
28
36