Kettler Axos Cycle R Скачать руководство пользователя страница 3

Страница: 3 / 14

Instructions for Assembly

RISK!

Ensure that your working area is free of possible sources

of danger, for example don’t leave any tools lying around. Always
dispose packaging material in such a way that it may not cause
any danger. There is always a risk of

suffocation

if children play

with plastic bags!

• Ensure that you have received all the parts required (see check

list) and that they are undamaged. Should you have any cause
for complaint, please contact your KETTLER dealer.

• Before assembling the equipment, study the drawings carefully

and carry out the operations in the order shown by the diagrams.
The correct sequence is given in capital letters.

• The equipment must be assembled with due care by an adult

person. If in doubt call upon the help of a second person, if pos-
sible technically talented.

• Please note that there is always a danger of injury when working

with tools or doing manual work. Therefore please be careful
when assembling this machine.

• The fastening material required for each assembly step is shown

in the diagram inset. Use the fastening material exactly as
instructed.

• Bolt all the parts together loosely at first, and check that they

have been assembled correctly. Tighten the locknuts by hand until
resistance is felt,

then use spanner to finally tighten nuts com-

pletely against resistance (locking device)

. Then check that all

screw connections have been tightened firmly.

Attention:

once

locknuts have been unscrewed they no longer function correctly
(the locking device is destroyed), and must be replaced.

• For technical reasons, we reserve the right to carry out prelim-

inary assembly work (e.g. addition of tubing plugs).

• Before beginning your first training session, familiarize yourself

thoroughly with all the functions and settings of the unit.

• A slight production of noise at the bearing of the centrifugal mass

is due to the construction and has no negative effect upon oper-
ation. Possibly occurring noise during reverse pedalling result
from engineering and are absolutely safe.

• The training device has a magnetic brake system.
• The equipment is independent of revolutions per minute.
•

Please ensure that liquids or perspiration never enter the machine
or the electronics.

• Before use, always check all screws and plug-in connections as

well as respective safety devices fit correctly.

• Always wear suitable shoes when using.
• Use for your regular cleaning, maintenance and care our

appliance maintenance set (Article no. 07921-000) specifi-
cally licensed for KETTLER Sports apparatus and available from
the Sport specialized trade.

• Nobody may be in the moving range of a training person

during training.

List of spare parts page

28-29

When ordering spare parts, always state the full article number, spare-
partnumber, the quantity required and the S/N of the product (see
handling).

Example order:

Art. no. 07986-996 / spare-part no. 68003517/

1 piece / S/N .................... Please keep original packaging of
this article, so that it may be used for transport at a later date, if
necessary.
Goods may

only

be returned after prior arrangement and in

(internal) packaging, which is safe for transportation, in the original
box if possible. It is important to provide a detailed defect description
/ damage report!

Important:

spare part prices do not include fastening material; if

fastening material (bolts, nuts, washers etc.) is required, this should
be clearly stated on the order by adding the words

„with fastening

material“

Waste Disposal

KETTLER products are recyclable. At the end of its useful
life please dispose of this article correctly and safely
(local refuse sites).

KETTLER GB Ltd.

Kettler House, Merse Road
North Moons Moat
Redditch, Worcestershire B98 9HL

+44 1527 591901

+44 1527 62423

www.kettler.co.uk