background image

MY20K04-2_1.0_19.08.2019

35

Description

The battery's service life can be extended if it is well 
maintained and, above all, stored at the correct 
temperatures. The charging capacity will decrease 
with age, even if the battery is maintained properly. If 
the operating time is severely shortened after 
charging, this is a sign that battery has reached the 
end of its useful life.

When the battery is switched on, the battery level 
indicator shows the start animation. The LEDs then 
briefly indicate the charge level of the battery.

If the battery is switched on, the charge level can be 
queried by briefly pressing the On-Off button.

The five green LEDs on the battery level indicator 
show the battery level when the battery is switched on. 
Each LED represents 20% of the charge level. 

When the battery is discharged, the last LED lights up 
intermittently. The charge level of the battery is also 
shown on the display. 

Transportation temperature

5 °C - 25 °C

Ideal transportation temperature

10 °C - 15 °C

Storage temperature

5 °C - 25 °C

Ideal storage temperature

10 °C - 15 °C

Charging ambient temperature

10 °C - 30 °C

Table 7:

Rechargeable battery technical data

EN_MY20K04-2_0.01_09.18_KETTLER  FAZUA.book  Page 35  Monday, August 19, 2019  1:53 PM

Содержание 2 E Pro 5


































































































































































Отзывы: