S
A
F
E
T
Y
I
N
S
T
R
U
C
T
I
O
N
S
FOR PORTABLE ELECTRIC TOOLS
REPLACEMENT PARTS
:
When servicing, use only original KETT replacement parts.
GENERAL SAFETY RULES FOR ALL TOOLS
GROUNDED AND DOUBLE INSULATED
1.
KEEP WORK AREA CLEAN
Cluttered areas and benches invite accidents.
2.
AVOID DANGEROUS ENVIRONMENT
Keep work area well lit.
3.
KEEP CHILDREN AWAY
All visitors should be kept a safe distance from work area.
4.
STORE IDLE TOOLS WHEN NOT IN USE
Tools should be stored in a dry, high, or locked-up place out of the reach of children.
5.
DON’T FORCE TOOL
It will do the job better and safer at the rate for which it was designed.
6.
USE RIGHT TOOL
Don’t force small tool or attachment to do the job of heavy-duty tool.
7.
WEAR PROPER APPAREL
No loose clothing or jewelry to get caught in moving parts.
8.
USE SAFETY GLASSES
Use safety glasses with all tools. Also face or dust mask if cutting operation is dusty.
9.
DON’T ABUSE CORD
Never carry tool by cord or yank it to disconnect from receptacle. Keep cord from heat, oil, and
sharp edges.
10.
SECURE WORK
Use clamps or vise to hold work. It’s safer than using your hand and it frees both hands to
operate tool.
11.
DON’T OVERREACH
Keep proper footing and balance at all times.
12.
MAINTAIN TOOLS WITH CARE
Keep tools sharp and clean for best and safest performance. Follow operating instructions for
adjustments, lubricating and changing accessories.
13.
DISCONNECT TOOLS
When not in use and before servicing or when changing accessories such as punch, die,
brushes, etc.
14.
REMOVE ADJUSTING KEYS AND WRENCHES
Form habit of checking to see that keys and adjusting wrenches are removed from tool before
turning it on.
15.
AVOID ACCIDENTAL STARTING
Don’t carry plugged in tool with fi nger on switch. Be sure switch is off when plugging in.
16.
OUTDOOR USE EXTENSION CORDS
When tool is used outdoors, use only extension cords marked “suitable for use with outdoor
appliances.”
Store indoors when not in use.
SERVICING INSTRUCTIONS:
All repairs and maintenance of the electrical components, armature, fi eld, switches and cords of
either double insulated or grounded tools must be performed by KETT TOOL COMPANY.
Содержание HN2
Страница 5: ......
