Kett HI-520, Руководство по эксплуатации

Страница: 17 / 24

15
(2) Measurement
1. Point the moisture sensor in the air and press the switch.
The buzzer will beep and will be displayed for
approximately 2 seconds. Next :
~
(the value
selected with the select dial) is displayed. ( is displayed if
set to the D. MODE.)
(Example) Mortar
• If the displayed numbers or symbols blink this indicates that the batteries are low.
Replace the batteries with new ones (9V 006P)
• If comes out, press switch and again, keeping the sensor in
the air.