ketrop LASER mini, Инструкция по эксплуатации

Страница: 22 / 56

4 use anD
OPeraTiOn
4.1 GeTTinG sTarTeD
4.2 COMMissiOninG
Operation is only allowed for “internally certified/authorised” operators.
The employer must register the names and the training level of each
operator.
NEVER allow to be distracted when you are operating the device.
Ensure the light source of the Laser..mini is clean at all time.
ALWAYS remove the batteries BEFORE cleaning the light source. Ensure
to NEVER look straight into the light source of an active laser, as this might
lead to irreversible eye damage!
Do not operate the Laser..mini if people are or could be within the reach of
the laser beam.
1. Turn the cover of the battery compartment to the left and insert
the battery into the device with the positive pole (+) pointing
outward.
2.
Put the cover back into place; the device is now ready to be used.
3. Switch ON the Laser..mini by means of the switch in the centre of
the cover.
4. The adjustment knob at the front of the lens allows you to narrow
down the beam or to widen it instead.
8