KETRON DG90, Руководство пользователя

Страница: 78 / 120

parts or otherwise. If set as No the Arabic scale is not cut-out from the whole Left part.
F5 Escape : This returns to the initial page of the Utility menu.
F6 Footswitch : If set as Note Mapping , the Arabic scale is also applied to the notes played using the pedal. If set
as Arabic Set , the thirteen Arabic scales to be called up instantly are assigned to the pedal switches.
F10 Normal : This resets the standard tuning.
When the modifications have been completed, save the scale in one of the thirteen available memory locations. Press
SAVE / ENTER to access the list of memory locations that can be selected using the CURSOR +/- push buttons. F10
Save saves the scale in the location selected at the time and F5 Escape returns to the previous page. The thirteen
Arabic scales saved can be easily called up while playing live using the optional pedal switches FS 6 and FS 13.
FF33 H Haarrm m.. M Mooddee
: This makes it possible to use the HARMONY push button to activate the Arab scale instead of calling up the Harmony function.
FF44 PPaassssw woorrdd:
This is used to set a password for those Hard Disk folders requiring it (see chapter Disk, Lock function) to protect data writ-
ing and reading. The password is assigned to the Hard Disk folders by pressing the
F1 Modify button. If no password has been
assigned yet, use the keys of the keyboard to write the new name into the New line. The name must consist of no more than
six letters. Press F10 Confirm to confirm. If an old password exists and you wish to modify it, first of all write the old name
into the Old line and then the new name into the New line. Finally, press F10 Confirm to confirm. F5 Escape takes you back
to the main page of the display.
FF55 PPaaggee M Meem moo: This stores the last page of each menu that will be displayed the next time the same menu is called up.
FF66 V Viiddeeoo: This is used to select the type of video output signal using the VALUE +/- push buttons, between PAL (European television
system), NTSC (American television system), SVHS Pal (super VHS European), SVHS NTSC (super VHS American), Monitor
(VGA monitor for computers), OFF (video card disabled).
FF77 D Diisspp.. TTiim mee: The value entered using the VALUE +/- push buttons establishes the time that the page in use remains displayed, at the end
of which the DG 90 returns to the main page of the display. Set as Off , the page in use remains displayed until another page
is manually accessed or cancelled.
FF88 D Diisspp.. M Mooddee : When set to Autoclose , the page from which the Voices and the Styles are selected, closes after the selection has been car-
ried out and the previous displayed page is shown again.
FF99 SSttyyllee SSeell
: Defines the Styles selection mode. When set to Group , the selection is carried out using the Styles groups corresponding to
the relevant push buttons like on the SD1. When set to Numeric , the Style is called up by entering the three numbers on the
numeric keypad ( STYLES push buttons), like on the X-series.
FF110 0 V Vooiiccee SSeell:
This is used to select the call-up mode of the Voices. In Mode 1 the last Voice selected within a single family is always auto-
matically called up when that group is selected. To change it, simply select another Voice within the same family. In Mode 2
the Voice is enabled only after it has been selected within the selected group using the function push buttons, so that the
Voice in use is not replaced just by calling up a family, but by the actual selection of the voice to be used.
DG 90 - Digital Piano
76
Utility