3
Post-meal marker.
Control test result.
Test results are displayed as mg/dL or mmol/L according to local
government regulation.
Indicates the temperature is not suitable for testing.
Notes:
Your Keto-Mojo
TM
GKI Multi-function
Meter is pre-set with beep sound function,
the meter will beep when:
•
You turn on the meter.
•
While setting the test type.
•
When setting the date and time.
•
When the test strip is inserted and is ready for application of blood or control
solution.
•
When sufficient blood or control solution is pulled into the test strip.
•
When the test is complete.
•
If any error occurs during operation.
Meter Use and Precautions
•
The meter is pre-set to display blood Glucose/Ketone concentration in either
millimoles per liter (mmol/L) or milligrams per deciliter (mg/dL) depending on
which unit of measure is standard in your country. And meter is pre-set to
display blood Ketone concentration in millimoles per liter (mmol/L). The unit of
measure cannot be adjusted.
•
Do not get water or other liquids inside the meter.
•
Keep the strip port area clean.
•
Keep your meter dry and avoid exposing it to extremes in temperature or
humidity. Do not leave it in your car.
•
Do not drop the meter or get it wet. If you do drop the meter or get it wet, check
the meter by running a quality control test. Refer to
Quality Control Test
for
instructions.
•
Do not take the meter apart. Taking the meter apart will void the warranty.
•
Refer to the
Caring for Your Meter
section for details on cleaning the meter.
•
Keep the meter and all associated parts out of reach of children.
Note:
Follow proper precautions and all local regulations when disposing of the
meter and used batteries.
All Glucose systems preventive warnings with regard to EMC
1. This instrument is tested for immunity to electrostatic discharge as specified in
IEC 61000-4-2. However, use of this instrument in a dry environment,
especially if synthetic materials are present (synthetic clothing, carpets, etc.)
may cause damaging static discharges that may cause erroneous results.
2. This instrument complies with the emission and immunity requirements
described in EN61326-1 and EN61326-2-6.Do not use this instrument in close
