5.
Hold mode
. Press
MAX
AVG
while holding
MAX
AVG
to hold the measured value on the display. The
word “HOLD” will blink to indicate the Hold Mode. Press
MAX
AVG
while holding
MAX
AVG
to exit
the Hold Mode. This mode can be useful for taking measurements when unable to view
the display, as within a duct. The Max and Avg Wind Speed Modes will continue to work
as usual.
6.
Turn on the backlight
. Press
MAX
AVG
to activate the backlight for 10 seconds. If
MAX
AVG
or
MAX
AVG
are
pressed while the backlight is illuminated, the backlight will remain illuminated
for another 10 seconds. Press
MAX
AVG
while the backlight is illuminated to manually turn off
the backlight.
7.
Turn off
. Hold
MAX
AVG
for 2 seconds to manually turn off the unit. The unit will automatically
turn off if no buttons have been pressed for 45 minutes.
3
