7
0000
RATE ERR
ERROR CODES
WARRANTY
This product is warranted against defects in materials and
workmanship for a period of two (2) years from the date of
shipment to Buyer.
The Warranty is limited to repair or replacement of the
defective unit at the option of the manufacturer. This war-
ranty is void if the product has been altered, misused,
dismantled, or otherwise abused.
ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED,
ARE EXCLUDED, INCLUDING BUT NOT LIMITED TO
THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE.
done
cal ERR
This error message is displayed when the "RATE LO" value is set equal to or higher than the
"RATE HI" value. Press
M
to re-enter the "RATE LO" and "RATE HI" values.
This error message is displayed when the "CAL LO" or "CAL HI" input is set at a value which
is out of range (see "CAL LO" and "CAL HI" in programming section for calibrating input
ranges). Press
M
to re-enter the "CAL LO" and/or "CAL HI" procedure.
e battry
If a low battery / invalid memory condition is detected, the display will flash and the "BAT"
descriptor will come on. Press
M
to acknowledge the condition, E BATTERY will be
displayed. Replace the battery, reinitialize and recalibrate the unit. (see "Battery Replace-
ment" below).
Battery Replacement
Suggested Battery:
Panasonic BR2330
The polarity of the battery must be correct. Plus (+) must be on
top as signified on the conductor arm.
Note:
The unit
must
be powered by the loop and reinitialized
immediately after battery replacement to prevent early battery
discharge.
All menu items must be re-entered and the unit must be re-
calibrated.
DECODING PART NUMBER
Example:
SQUIRTR
3
ET
SQUIRTR
Loop powered; Rate Only
Mounting:
0 = OEM
1 = Panel Mount
2 = NEMA 4X Box (SquirtR behind clear cover)
3 = Explosion Proof Housing
5 = NEMA 4X Box (SquirtR outside opaque cover)
Options:
ET = Extended Temp.: -22
°
F to 158
°
F (-30
°
C to 70
°
C)
H2 = 0.875" Hole for mounting styles 2 and 5
HF2 = 0.5" Female NPT Hub fitting
H3 = 1.125" Hole for mounting styles 2 and 5
HF3 = 0.75" Female NPT Hub fitting
7
Battery Replacement
Suggested Battery:
Panasonic BR2330
The polarity of the battery must be correct. Plus (+) must
be on top as signified on the conductor arm.
Note:
The unit must be powered by the loop and
reinitialized immediately after battery replacement to
prevent early battery discharge.
All menu items must be re-entered and the unit must be
re-calibrated.
WARRANTY
This product is warranted against defects in materials and
workmanship for a period of two (2) years from the date of
shipment to Buyer.
The Warranty is limited to repair or replacement of the
defective unit at the option of the manufacturer. This
warranty is void if the product has been altered, misused,
dismantled, or otherwise abused.
ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED,
ARE EXCLUDED, INCLUDING BUT NOT LIMITED TO
THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE.
DECODING PART NUMBER
Example:
SQUIRTR
3
ET
SQUIRTR
Loop powered; Rate Only
Mounting:
0 = OEM
1
= Panel Mount
2 = NEMA 4X Box (Squirt behind clear cover)
3NE = Explosion Proof Housing, White
Includes Third Conduit Entry
3SS = Stainless Steel Ex-Proof Housing
5 = NEMA 4X Box (Squirt outside opaque cover)
6 = Double Ended Explosion Proof Housing
Options:
ET = Extended Temp.: -22°F to 158°F (-30°C to 70°C)
ATEXCASE** = European Flame Proof
ATEX Case (consult factory)
H2 = 0.875" Hole for mounting styles 2 and 5
CG - Cable Grip with Locking Nut
used for H2 option
HF2 = 1/2" Female NPT Hub fitting
(mount styles 2 & 5)
H3 = 1.125" Hole for mounting styles 2 and 5
HF3 = 3/4" Female NPT Hub fitting
(mount styles 2 & 5)
** Contact factory for latest information
