background image

AP9X DAISY-CHAIN SCENARIO

CONTROLLING MULTIPLE K-LINK & 0-10V FIXTURES

MOUNTING

•  Hang the light with the four Screw Hooks and the four Hanging Brackets.
•  To install the Hanging Brackets, remove the screws on the AP9X, use the same screws 

to secure the fasteners with triangular rings (Hanging Brackets) onto the light fixture.

0-10V(Output only)

0-10V(Output only)

K-Link

K-Link

K-Link

0-10V(R)

K-Link 0-10V(L)

Multiple AP9X (up to 32 K-Link fixtures) can be connected using "Kessil WiFi" app and 
K-Link Cables. Only the master AP9X should have Wi-Fi signal turned on (Wi-Fi indicator 
(B) is ON), Wi-Fi signal on the other fixtures should be OFF. 
Mode Indicator (A) will be 

solid blue

 and control buttons are disabled.

INT

COLOR

Wi-Fi Mode

INT

COLOR

Wi-Fi Mode

• Two K-Link ports (J): Connect and control multiple X-series K-Link fixtures using "Kessil 

WiFi" app and K-Link Cables. When connecting Kessil Wi-Fi enabled products, make 
sure to turn off  the Wi-Fi signal of  the slave fixtures. When controlling them (Tuna Blue 
only) manually, tuning controls on any light control all other lights in chain. 

• Two 0-10V Output ports (K): Connect and control multiple 0-10V fixtures using "Kessil 

WiFi" app.

INT

COLOR

Wi-Fi Mode

INT

COLOR

Wi-Fi Mode

Wireless Router

Содержание AP9X














Отзывы: