Kessel Pumpfix S, Инструкция по установке и эксплуатации

Страница: 17 / 92

1 Notes on this manual
The following conventions make it easier to navigate the
manual:
Symbol Explanation
[1] See Figure 1
(5) Position number 5 from the adjacent figure
...
Action step in figure
Check whether
manual control
has been acti-
vated.
Prerequisite for action
Press OK.
Action step
✓ System is ready
for operation.
Result of action
see "Safety",
page 17
Cross-reference to Chapter 2
Bold type
Particularly important or
safety-relevant information
Italics
Variants or additional information (e.g.
applicable only for ATEX variants)
Technical information or instructions
which must be paid particular attention.
2 Safety
2.1 General safety notes
NOTICE
Disconnect system from energy sources!
Ensure that the electrical components are discon-
nected from the electrical power supply during
the work.
WARNING
Live parts
Heed the following points when working on electrical
cables and connections.
The national regulations concerning electrical
safety apply to all connections and installation
work.
The system must be supplied through a residual
current protection device (RCD) with residual cur-
rent of not more than 30mA.
2.2 Personnel - qualification
In order to guarantee the long-term safety of the system,
only the following activities may be performed, in accordance
with the qualification of the person carrying out the activity.
EN
016-168 Installation and operating manual 17 / 92