Kontakt bezpotencjałowy
Do urządzenia sterującego można podłączyć zestaw rozszerzający w formie kontaktu bezpotencjałowego, dostępnego
jako osprzęt (nr art. 80074). Umożliwia on połączenie urządzenia z systemem zarządzania budynkiem lub innym osprzę-
tem, np. lampą ostrzegawczą (nr art. 97715).
Podłączyć do prądu.
Aby aktywować kontakt bezpotencjałowy, należy nacisnąć jednocześnie przycisk alarmu (2) i przycisk trybu ręcznego (4) i
przytrzymać je wciśnięte przez 10 sekund.
Urządzenie sterujące generuje 2 razy krótki sygnał dźwiękowy potwierdzający, że kontakt bezpotencjałowy może zostać
podłączony.
Nacisnąć przycisk alarmu (2) przez 10 sekund, aby aktywować ustawienie.
Podłączyć kontakt bezpotencjałowy według schematu połączeń (
patrz "Schemat połączeń"
).
Jeśli przycisk naciskany jest przez 10 sekund, urządzenie na nowo aktywuje zewnętrzny podajnik sygnału lub kontakt
bezpotencjałowy.
PL
016-233_01
103 / 116