Kersten WKB 50, Инструкция оператора

Страница: 18 / 28

18
8 Assembley
8.1 Connecting Attachments
The versatile power unit is designed to operate several different attach-
ments. These may usually be changed quickly without the use of tools.
Ensure the steel parts of the connection on the power unit and implement
are free from dirt and rust.
Lightly lubricate the connections with grease.
Lift and rotate the locking pin backwards on the power unit (A fig.1) until it
locks in the disengaged position.
Ensure the flexible drive coupling (fig.1) is located in the implement coupling
jaw.
Slide the attachment in to the power unit. Sometimes the PTO drive teeth
are stubborn to engage. Manual rotating adjustment may be required to line
up the flexible coupling as the two parts are pushed together.
When the two parts are fully engaged it will be possible to release the lock-
ing pin (A fig.1) which will locate in to slot B.
There is a grease lubrication point under the chassis (fig.1)
Some attachments have a secondary locking device to prevent the unit from
rotating which is secured by a spring locking pin.
Remove the attachment by reversing the above directions
Flexible drive
coupling
Grease Nipple
Fig 1
A
B
Operating the machine