Kersten Weedo II Скачать руководство пользователя

Страница: 16 / 79

Single-axis weed brush Weedo II

Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here.

Item: 20 / Instructions / 3 Safety / General / 3.01 Pictograms @ 6 \ mod_1504524108960_6.docx @ 100806 @ 2 @ 1

Pictograms

3.2 Pictograms

Item: 21 / Instructions / 3 Safety / General / 3.01.01 Follow instructions @ 6 \ mod_1504524190747_6.docx @ 100929 @ @ 1

Follow instructions

Item: 22 / Instructions / 3 Safety / General / 3.01.02 Wear protective clothing @ 6 \ mod_1504524212794_6.docx @ 100981 @ @ 1

Wear protective clothing

Item: 23 / Instructions / 3 Safety / General / 3.01.03 Wear safety shoes @ 6 \ mod_1504524207408_6.docx @ 100968 @ @ 1

Wear safety shoes

Item: 24 / Instructions / 3 Safety / General / 3.01.04 Wear protective gloves @ 6 \ mod_1504524202422_6.docx @ 100955 @ @ 1

wearing safety gloves

Item: 25 / Instructions / 3 Safety / General / 3.01.05 Wear safety glasses @ 6 \ mod_1504524665367_6.docx @ 100994 @ @ 1

wear safety glasses

2019-03-01

16 / 79

Only use the marked machine after reading the instructions.

This sign indicates that protective clothing must be worn in the area concerned.

Protective work clothing is tight-fitting work clothing with low tear resistance, with
narrow sleeves and no protruding parts.

This sign indicates that safety shoes must be worn in the area concerned.

Safety shoes protect the feet from crushing, falling parts and slipping on slippery
surfaces.

This sign indicates that protective gloves must be worn in the area concerned.

Protective gloves are used to protect the hands from friction, abrasions, punctures,
cuts or deeper injuries as well as from contact with hot surfaces.

This sign indicates that safety glasses must be worn in the area in question.

The safety glasses serve to protect the eyes from flying parts and liquid splashes.

Содержание Weedo II
















































































Результаты поиска

Содержание Weedo II

Отзывы:

Похожие инструкции для Weedo II

Бренды по названию

Популярные бренды

Kersten Weedo II, Оригинальная инструкция по эксплуатации

Результаты поиска

Содержание Weedo II

Отзывы:

Похожие инструкции для Weedo II

Бренды по названию

Популярные бренды