UBS Hydro II
Operation
EN
2018-05-02
37 / 60
The tilting angle of the steering bar can be adjusted to ensure the ergonomically
optimum operating height for the operator.
Furthermore, this adjustment makes it possible to set the steering bar in its vertical
position to minimise the dimensions for transport.
To tilt the steering bar, carry out the following steps:
1.
Release the locking bolts on both bottom sides (1).
2.
Set the steering bar in its desired inclined position.
3.
Get the locking bolts snapped in on both bottom side (1) and move the
steering bar a bit to the front and to the rear until the locking bolt snaps in.
6.7
Tilting of the operating panel
Fig. 13: Tilting of operating unit
1
Locking bolt
The tilting angle of the operating panel can be adjusted to ensure the
ergonomically optimum operating height for the operator.
To tilt the operating unit, carry out the following steps:
1.
Release the locking bolts on both sides (1).
2.
Set the operating panel in its desired inclined position.
3.
Get the locking bolts snapped in on both sides (1) and move the operating
panel a bit up and down until the locking bolt snaps in.