UBS Hydro II
Operation
EN
2018-05-02
31 / 60
2
Auxiliary drive
3
Drive lever, right
4
Engine switch
To start the engine carry out the following steps:
•
Drive lever (1, 3) must be in horizontal position.
•
The leve
r for the auxiliary drive (2) must be shifted to the „Off“ position.
•
Set the engine switch (4) on the engine in its „I" position.
Also when the engine can be started without meeting the before mentioned
conditions, the manufacturer recommends ensuring the before mentioned
conditions.
The engine can be started without meeting the items mentioned above. For moving
off however, it is strictly required to meet the above mentioned conditions.
To start the engine, observe the respective Operating Instructions issued by
the engine manufacturer!
6.3
Moving off / switching on the auxiliary drive
Fig. 8: Operating Unit
1
Drive lever, right
2
Drive lever, left
3
Dead man lever
4
Adjustment lever
5
Auxiliary drive
6
Throttle lever
