Kersten KM 19060 H, Руководство по эксплуатации

Страница: 8 / 23

8
KM 19060 H; KM 22560 H; KM 25060 H; KM 27060 H
3.2.7 Coupling and uncoupling attachments
•
Only connect and disconnect implements with the engine switched off and the PTO
switched off.
•
When changing attachments and their parts, use suitable tools and wear gloves.
•
When mounting and dismounting, bring the required support equipment into the respective
position and ensure sufficient stability.
•
Secure the self-propelled work machine and the attachment to prevent it from rolling
(parking brake, wheel chocks).
•
When attaching attachments, there is a risk of injury (crushing). Special care is necessary.
•
Attach implements according to regulations and fix at the prescribed places.
3.2.8 Maintenance, cleaning and repair work
•
Only carry out maintenance and cleaning work with the drive switched off and the motor
stationary!
•
If guards and working tools are subject to wear, these must be checked regularly and
replaced if necessary.
•
Only use original spare parts from the manufacturer, as these meet the technical
requirements and thus the risk of accidents is minimized!
•
Cleaning with the high-pressure cleaner should be carried out in such a way that the water
jet is not directly in storage, turned parts, grease nipples, shaft seals, wheel hubs etc. is
held.
After each cleaning with the high-pressure cleaner, the lubricating be greased. In the case of
infringement, the right to guarantee expires!
•
Check the moving parts for ease of movement and if necessary grease them!
•
After maintenance and cleaning work, be sure to replace the guards and put them in the
protective position!
•
To avoid the risk of fire, keep the machine clean!
•
Check nuts and bolts regularly for tightness and tighten if necessary.
•
During maintenance, cleaning and repair work on the raised device always make sure that it
is protected by suitable support elements!
•
Before doing any repairs, make sure the hydraulic system is depressurized, because fluids
under pressure can penetrate the skin and cause serious injury cause! Therefore, seek
medical attention immediately - risk of infection!
•
Repairs may only be carried out by qualified personnel.
•
Check hydraulic hose lines for damage and aging at regular intervals and replace if
necessary.
•
When carrying out welding work on the tractor or on the mounted implement, disconnect the
battery.
•
Repair work such as welding, grinding, drilling, etc. must not be carried out on load-
bearing and other safety-related parts such as frames, axles, etc.!