Kersten KM 11545 H-ABR 45, Оригинальная инструкция по эксплуатации, Страница: 20 / 25

20
Maintenance
9 Maintenance
9.1 General maintenance instructions
•
Failure to do so may result in injury to persons or damage to the machine. Before each use
of the machine check all
•
safety-relevant parts.
•
The machine must be regularly serviced.
•
Repairs, maintenance and cleaning work as well as the elimination of malfunctions must only
be carried out with the implement disconnected.
•
During all work, the machine must be secured against rolling or tipping by taking suitable
measures.
•
Regularly check nuts and bolts for tightness and retighten if necessary.
•
Only use original spare parts from the manufacturer!
•
Check all bolt and bolt connections after the first 5 hours of operation.
•
Once all work has been completed, all disassembled protective devices must be properly
replaced.
•
Lubricate or lubricate all moving parts. *
9.2 Daily exam
•
Check the tools for tightness.
•
Check the safety elements and moving parts for wear before each use.
•
Perform a test run before each use.
•
Clean the device after each use.
9.3 Maintenance after 20 operating hours or longer downtime
•
At regular intervals and always at the beginning and end of the season, the moving parts of the unit
must be greased or oiled.
•
Lubricating nipples are located in the wheel receivers and in the bearing pin of the connection
mount, these lubricate regularly.
•
Lubricate the attachment of the attachment regularly.
•
When changing the transmission oil, replace the first oil after 50 operating hours.
•
Further oil change maintenance after approx. 500 operating hours or once a year
9.4 Storage
If the machine is not used for a long time, the following measures are recommended:
1.
Carry out cleaning
2.
Check the function of all parts
3.
Check all screws and bolts for tightness and retighten them if necessary.
4.
Replace worn or damaged components, only use original Kersten spare parts!
5.
Regrease lubrication points (=> grease nipple)
6.
Subordinate machine
• To prevent corrosion, protect the machine from weathering. Do not place the
machine in damp rooms, stables or artificial fertilizer warehouses.
7.
Cover the machine with a cloth or similar.