2018-12-18
38 / 74
Front sweeper FKM 60
Function Description
ENG
3.4.4 Attachment brush (option)
Fig. 14: Attachment side brush
1
Turnbuckle
2
Joint with lock
3
Spring joint with stop
4
Adjustment plate with lock
5
Hydraulic drive
6
Brush
The mounted side brush returns leaves, dirt and weeds to edge strips and
allows cleaning with the front sweeper. The mounted side brush can be
swiveled by hand or by means of a hydraulic cylinder around the joint with
lock (2) and thus be connected to the process. The working height can be
adjusted via the turnbuckle (1). Furthermore, the brush (6) can be adjusted in
two axes by means of an adjustment plate with lock (4) (see chapter 6.3.1
Setting the extension side brush on page 51).
A spring joint with stop (3) exerts a constant pressure against the edge strip
during the working process. The brush (6) is driven by a hydraulic cylinder (5).
3.4.5 Solenoid valve (option)
The optional solenoid valve is used to switch the hydraulic circuit. In this case, the
single-circuit hydraulic flow can be switched from the sweeping roller drive to the
hydraulic pivoting device. The control can be carried out via the driver's cab using
the KM-Control remote control (see chapter 6.4 KM-Control operating instructions
(option) on page 53).
Содержание FKM 60
Страница 74: ...2018 12 18 74 74 ENG...