KERR 1258 Series, Инструкция по эксплуатации и список запасных частей

Страница: 7 / 20

7
Introduction
Intended Use
The Kerr Auto Electro-Melt Furnace is designed for con-
venient electric melting of metals, providing melting tem-
peratures up to 1120°C/ 2050°F. It is an ideal metal melt-
ing unit for casting as well as for alloying metals.
The furnace, supplied with a special graphite crucible,
features embedded elements in a molded ceramic fiber
insulation.
The operating temperatures of the Kerr Auto Electro-Melt
Furnace, which range from room temperature to
1120°C/2050°F, are indicated on the built-in controller.
The Digital Control allows the furnace to reach and main-
tain any desired temperature within the specified operat-
ing range.
Caution
It is recommended that the graphite
crucible be examined after each use.
Should the crucible show excess wear
and/or cracks on the surface, it should
be discarded and replaced with a new
graphite crucible.
Hot Surface
“Caution: Hot Surface. Avoid Contact.”
Avoid contact with the hot furnace
heating chamber. Always use the han-
dle.