Kero-Sun KTMC-15, Инструкция по эксплуатации

Страница: 5 / 12

5
ENGLISH
OPERATING INSTRUCTIONS
NOTE: When switched on for the fi rst time a slight odor may be emitted for a few minutes. This is
harmless and occurs with most appliances as slight traces of dust or lubricants may have collected
during manufacture.
• Place the heater on a level surface in a stable upright position.
• Ensure power switch is in the “0” (OFF) position and the thermostat is in the “•” (OFF) position.
• Unwind the power cord and plug your heater into a power socket (following the instructions
regarding positioning).
Ensure the voltage on the speci fi cation plate is the same as in your home and the power cord is
lying safely on the ground.
• Switch the heater “ON” by selecting:
Model: KTMC-15
a. power setting I: 750W or
b. power setting II: 1500W
Model: KTMC-20
a. power setting I: 1000W or
b. power setting II: 2000W
• The heater operates when both the power switch and thermostat function are activated.
The red indicator will be turned on while the appliance is activated.
THERMOSTAT FUNCTION
• Set the desired room temperature by turning the thermostat dial clockwise to the desired posi-
tion. You may adjust the temperature during use. To turn down the thermostat, turn the dial
anti-clockwise.
• To fi nd the ideal thermostat setting for you, fi rst set the knob to the “maximum” position. As soon
as the temperature is comfortable, turn the thermostat down slowly, until the heater turns off. The
heater will keep the surrounding air at this set temperature by switching on and off at intervals.
The indicator light lights up when the heater is on.
• To switch the heater off fully, turn the power switch to “0” and the thermostat to “•”. The indicator
light will turn off also.
Power Switch
Indicator Light
Thermostat Control