Kernau KCH 4860 B, Инструкция по установке и эксплуатации

Страница: 26 / 29

EN
26
KCH 4860 B / KCH 4890 B
In order to select the cooker hood functions, you have to lightly touch the
controls.
1. Turning off the device / decreasing the speed
This button is intended for decreasing the motor speed. In order to turn off the
motor, press and hold it.
2. Turning on the device / increasing the speed
When the device is in off mode, press this button in order to start the motor. When
the device is operating, press this button to increase the speed by one gear higher
(4 is the maximum gear). The current gear is presented on the LCD. A digit on
the display corresponds to the current motor speed.
3. LCD
Presents the current functions / operating mode of the cooker hood.
4. Timer
It enables the programming of automatic shutdown of the cooker hood.
5. Turning the lighting on / off
Timer
There’s a possibility to program an automatic shutdown of the cooker hood
fan at any time, selected in the scope between 10 and 90 minutes, in 10-minute
intervals. In order to activate the programming function, switch on the cooker
hood motor to the desired gear with the use of button 4, and then press the button
of programming the hood shutdown time. A pulsing LED will appear on the
display, informing that the controller has entered the time programming mode.
Select the time of automatic motor shutdown with the use of button ‚’1,2,3’’,
while remembering that the digit indicated by the display and multiplied by
10-minute time interval, corresponds to the
time of delayed hood motor shutdown (e.g.
digit 1=10 min, digit 2=20 min, digit 3=30 min, etc.). While having set the
value of delayed shutdown, confirm it again with the button of programming
the hood shutdown, then the display will stop blinking and it will indicate
the previously set gear, while the pulsating dot by the gear will signal the
measuring of time for the hood motor shutdown.
1 2 3 4 5