Kernau KCH 1761 BE, Инструкция по эксплуатации, Страница: 16 / 34

After the 15 minutes, start washing and rinse the filter thoroughly. The filter must be
completely dry before placed in the hood again. A filter that is not cleaned regularly reduces
hood efficiency an can cause fire. When washing in the dishwasher, filter may change color
or discolor, but this does not affect its filtering properties.
CARBON FILTER (for closed circiut Fig. S5)
The hood may be equipped with the carbon filters. Carbon filters are use only when the
hood is not connected to the ventilation duct. Filters should be instaled on turbin housing as
shown figure S5. In this case, the purified air is forwarded back to the room. The hood should
not be connected to the ventilation ducts. In order to ensure proper hood operation and
effective odor absorption, the carbon filters should be repalced regulary (every 3 to 6 months)
depending on the intensity of use of the hood. The carbon filter is not a standard equipment of
the hood ant it is an additional paid option.
REPLACEMENT OF LIGHTENING (Fig. S2)
Before undertaking any operations related to the replacement of lightbulbs, the hood
should be disconnected from the power supply network. If the hood was corectly disconnected
from the power supply, please wait a few minutes, and after the cooling the lightbulb, it can
be replaced.
CAUTION!
Do not touch light bulbs as long as they are hot. Be careful not to touch directly the halogen
bulb with bare hands.
Replacement aluminium filter - fig. S1
Replacement of lightening - fig. S2
Installation of the kitchen hood - fig. S3
Dimensions of the kitchen hood - fig. S4
Replacement carbon filters - fig. S5
16
EN