Kernau KCH 1261 X, Инструкция по эксплуатации, Страница: 21 / 36

CARBON FILTER (for closed circiut Fig. S5)
The hood may be equipped with the carbon filters. Carbon filters are use only when the
hood is not connected to the ventilation duct. Filters should be instaled on turbin housing as
shown figure S5. In this case, the purified air is forwarded back to the room. The hood should
not be connected to the ventilation ducts. In order to ensure proper hood operation and
effective odor absorption, the carbon filters should be repalced regulary (every 3 to 6 months)
depending on the intensity of use of the hood. The carbon filter is not a standard equipment of
the hood ant it is an additional paid option.
REPLACEMENT OF LIGHTENING (Fig. S2)
Before undertaking any operations related to the replacement of lightbulbs, the hood
should be disconnected from the power supply network. If the hood was corectly disconnected
from the power supply, please wait a few minutes, and after the cooling the lightbulb, it can
be replaced.
CAUTION!
Do not touch light bulbs as long as they are hot. Be careful not to touch directly the
halogen bulb with bare hands.
MECHANICAL CONTROL
Turbine operation control:
• 0 - turns off the turbine
• 1 - turbine operation at minimum speed
• 2 - turbine operation at average speed
• 3 - turbine operation at maximum speed
Turbine is started by pressing the selected buton. Higher gear means grates air flow.
EN
21