Kernau KCH 1161 B, Инструкция по эксплуатации, Страница: 32 / 55

EN
32
4. MAINTENANCE AND CLEANING
CAUTION:
• Before maintenance or cleaning is carried out, the cooker hood should be disconnected
from the main power supply. Ensure that the cooker hood is switched off at the wall
socket and the plug removed.
• External surfaces are susceptible to scratches and abrasions, so please follow
the cleaning instructions to ensure the best possible result is achieved without
damage.
General
Cleaning and maintenance should be carried out with the appliance cold especially
when cleaning.Avoid leaving alkaline or acid substances (lemon juice, vinegar etc.)
on the surfaces.
Stainless
steel
The stainless steel must be cleaned regularly (e.g.weekly) to ensure long life expectancy.
Dry with a clean soft cloth. A specialized stainless steel cleaning fluid may be used.
NOTE:
Ensure that wiping is done along with the grain of the stainless steel to prevent any
unsightly crisscross scratching patterns from appearing.
Control panel surface
The inlay control panel can be cleaned using warm soapy water. Ensure the cloth is clean
and well wrung before cleaning. Use a dry soft cloth to remove any excess moisture left
after cleaning.
IMPORTANT:
Using neutral detergents and avoid using harsh cleaning chemicals, strong household
detergents or products containing abrasives,as this will affect the appliance appearance
and potentially remove any printing of artwork on the control panel and will void
manufactures warrantee.
Grease mesh filters
The mesh filters can be cleaned by hand. Soak them for about 3 minute in water with
a grease-loosening detergent then brush it gently with a soft brush. Please do not apply
too much pressure, avoid to damage it. (Leave to dry naturally out of direct sun light).