KERN VHB 2T1, Руководство по эксплуатации, Страница: 30 / 51

VHB/VHS-BA-e-1613 12

Press
PRE-
TARE
button

Press the numeric
TOTAL
up or down
PRE-
TARE key until the flashing number has reached
the desired value.

To move to the next segment, press the key
TARE

Repeat this action until the display shows the desired tare value.

To activate the tare weight ( but not for storing) : Press the
TARE
key for three
seconds, to confirm the value.

The tare weight is now activated.

“NET” appears.

If the system is loaded at this moment, the net value of the weighed weight
appears on the display.

If the system is unloaded, the system indicates the entered tare value negative.

The entered value remains active until the weighing system is turned off, a new
tare weight entered, a new load tared (See 7.3.) or if a reset to zero is carried
out:

The weighing system is loaded: Press the
PRE-
TARE key for two seconds. The tare
value will be reset to zero and the system reverts to standard weighing
mode.
or

The weighing system is unloaded: Press
TARE
button A reset to zero is
carried out and the system reverts to standard weighing mode.

To activate and store the tare weight: Confirm all segments by pressing the
TARE
key.

The tare weight is now activated and stored.

“NET” appears.

If the system is loaded at this moment, the net value of the weighed weight
appears on the display.

If the system is unloaded, the entered tare value is shown negative.

The entered value remains active even after the system was turned off, until a
new tare weight is entered, a new load tared (See 7.3.) or a reset to zero is
carried out.

The weighing system is loaded: Press the
PRE-
TARE key for two seconds. The tare
value will be reset to zero and the system reverts to standard weighing
mode.
or

The weighing system is unloaded: Press button. A reset to zero is carried
out and the system reverts to standard weighing mode.