YKI-02-BA-e-1410
9
The changes will be applied by pressing „Save Settings“:
Connect the adapter with the target device as described above
You now can pair the target device with your laptop/tablet/smartphone (using the
Bluetooth service discovery).
Use a software supporting the Bluetooth serial port profile (SPP) to read-out and
control the target device wirelessly.
5.4 Using the adapter with printers or other passive devices
The master mode allows to use the adapter with a passive Bluetooth device like printers.
In this case, the connection has to be initiated (“pairing”) by the adapter, using the device
name and pin code of the target device / printer. The following explain how to set up a
connection between a scale and a Bluetooth printer KERN YKC-01:
Read the current settings of the adapter (see above).
Make sure the adapter‘s communication parameters match the ones of the target
device (see above)
Make sure the „Device Mode“ is set to „Master”:
Enter the pin code of the target device
(for the printer example it has to be set to „0000“):
Uncheck the checkbox
„Auto-Connect“:
