KERN OZO 551, Инструкция пользователя

Страница: 19 / 27

OZO-5_OZP-5-BA-e-1510 18
This means that when the device is used in trinocular mode, you will see one image
in the left eyepiece and one on the reflex camera or monitor of the microscope
camera.
This means that the 3D effect is lost.
To fit a microscope camera properly, you must use an adapter with a C-mount
thread
, which is put in the adapter connection once the cap is removed.
In total there are three focusable adapters to choose from
(see figure below) . The
difference between these adapters is that they have different integrated magnification
(0.3x, 0.5x, 1.0x).
The camera and adapter are then united using the C-mount thread.
For special measuring applications in conjunction with a microscope camera, when
using the 1.0x C-mount, there is the option of screwing in a second adapter with an
integrated micrometre in front of the camera.
C-mount adapter
You also need an adapter to connect a reflex camera.
But in contrast to the
microscope camera this does not have a C-mount thread, but has a bayonet
connection which fits directly on the camera objective.
There are also three different adapters to choose from. They all have a 1x
magnification and differ in the fact that they come from different camera
manufacturers.
Canon, Nikon and Olympus cameras can be used for this.
The image which is shown on the camera connected to the device can often have a
different level of focus compared with the image on the eyepiece. In order to be able
to bring both images into focus, all
previously described adapters can be
focussed .