GAB-N-BA-e-1315
25
10.4 Parts counting
Before the balance can count parts, it must know the average part weight (i.e.
reference). Proceed by putting on a certain number of the parts to be counted. The
balance determines the total weight and divides it by the number of parts (the so-
called reference quantity). Counting is then carried out on the basis of the calculated
average piece weight.
The higher the reference quantity the higher the counting exactness.
(example)
Place the reference quantity
Press
F
C
, the scales will change to quantity counting mode
Reference quantity of 10,
P 10
will appear.
Reference quantities of 10, 20, 50, 100 and 200 can be set
by pressing
TARE
.
(example)
GROSS
GROSS
pcs
Confirm by pressing
0
You will briefly see a line on the screen before the scales
show the respective quantity
To change between reference weight, total weight and
quantity, press the
key.
To return to weighing mode, press the
F
C
key.
