KERN FEJ 17K0.1 IPM Скачать руководство пользователя страница 88

Страница: 88 / 89

FES/FEJ-BA-e-1132

16 Service, maintenance, disposal

16.1 Cleaning

Before cleaning, please disconnect the appliance from the operating voltage.

Please do not use aggressive cleaning agents (solvents or similar agents), but a cloth
dampened with mild soap suds.
The weighing terminal has a

pressure compensation device

This is underneath the terminal and made of a glued on membrane.
When cleaning please ensure that the

membrane is not damaged

or soiled.

16.2 Service, maintenance

The appliance may only be opened by trained service technicians who are

authorized by KERN.
Before opening, disconnect from power supply.

16.3 Disposal

Disposal of packaging and appliance must be carried out by operator according to
valid national or regional law of the location where the appliance is used.

Содержание FEJ 17K0.1 IPM


























































































Результаты поиска

Содержание FEJ 17K0.1 IPM

Отзывы:

Бренды по названию

Популярные бренды

KERN FEJ 17K0.1 IPM, Руководство по эксплуатации

Результаты поиска

Содержание FEJ 17K0.1 IPM

Отзывы:

Бренды по названию

Популярные бренды