EOB / EOE / EOS -BA-e-1741
23
8.5 Determination of the number of pieces
Before it is possible to determine the number of pieces by means of the scales, it is
necessary to specify the average piece weight (unit weight), the so-called reference
value. In order to do it, one shall place the specific number of pieces being counted
up. By means of the scales, the total mass shall be determined which then will be
divided by the number of pieces (the so-called reference pieces). Afterwards, based
on the calculated average piece weight, counting up shall be carried out.
The greater the number of reference pieces, the higher the accuracy of
counting up.
In the weighing module, by means of
button, set
„Pcs” unit. The scales is now in the module allowing to
determine the number of pieces.
Keep pushing
button until the display shows
„C00000”. The value after the comma blinks.
The number of reference pieces may be entered in the
way described below:
•
: Increasing the numerical value
•
: Moving on to the next value after comma
•
: Confirmation of the entered number of
reference pieces
Enter the number of reference pieces in the way described
above. Here, for example 100 pieces. Digit "1" blinks.
(example)
Place the pieces to be counted up on the scales and
confirm by means of pushing
button. The number of
pieces shall be displayed.
