KERN ECE 10K10 Скачать руководство пользователя страница 9

ECE-BA-e-0711 

9

6.2.2 Package 

volume 

 
Serial fittings: 

 

KERN ECB 

  Balance 

  Operating manual 

  Power adaptor 

 

 

6.3  Mains supply/ Battery operation 

6.3.1 Mains 

supply 

Electric power supply is by means of the external mains supply circuit. The printed 
voltage level must comply with the local voltage.  
Only use original KERN mains supply circuits. The use of other makes is subject to 
approval by Kern.  
 
Mains adapter output voltage: 9V DC (polarity: inner terminal is negative) 
 

6.3.2 Battery 

operation 

Open the battery cover on the underside of the balance. Insert 6 x 1.5volt (AA) bat-
teries.

 

Replace the battery cover. To preserve battery life, the balance switches off 
automatically after 3 minutes if no weighing has taken place. 

For battery operation the balance has an automatic switchoff function which can be 
activated and deactivated in the menu (chap. 7.5). 
When the battery power is used up the display will show “LO“. Press the ON/OFF 
key and change the batteries at once. 
When the balance is not in use for a longer period of time remove batteries and keep 
them separately. Leakage of battery liquid might damage the balance. 
 
The optionally supplied battery is charged with the supplied power supply. 
The battery has a service life of c. 100 hours. 

The charging period for total charge is c. 10 hours. 

Содержание ECE 10K10















Отзывы: