Kermi KIMA 6917741, Руководство по установке

Страница: 4 / 28

4
1. EN – Manufacturer
notes
1.1 Permissible use
The stand bracket is intended solely for fixing
FTP, PTP and PLP Kermi steel panel radiators
type 12, height 300–600 mm and length
600–2600 mm, at the valve end, for applica-
tion class 2. Any other use is contrary to the in-
tended purpose and therefore not permissible.
The operator will bear sole responsibility for
any damages resulting from this, the warranty
provided by the manufacturer will be void.
1.2 Safety information
W
Read these instructions thoroughly before
starting with the installation.
W
The product must be installed properly by
qualified experts.
W
Playing with the device is prohibited.
1.3 Transport, packaging, storage
W
Check that the delivery is complete and
undamaged (Fig. 1). If you should find any
transport damage or if the delivery is in-
complete, please notify your dealer.
W
Ensure the mounting brackets are in their
protective packaging during transport and
storage.
Warning
Personal injury or material damage!
W
Always transport and install loads >15 kg
with more than one person or use lifting
aids.
1.4 Maintenance
The product does not require any special
maintenance.
1.5 Cleaning
Use only mild, non-scouring cleaning agents.
1.6 Disposal
Recycle or dispose of disused components, in-
cluding accessories and packaging, properly.
Comply with local regulations.
2. Installation
The product may only be installed by a specia-
list. After installation, pass the instructions to
the end consumer.
Note
For mounting on a finished floor, the stand
bracket bases must be shortened in accor-
dance with the floor structure by the speci-
alist installer.
2.1 Installation information
W
Prepare tools (Fig. 2)
W
Open radiator packaging at the bottom in
the area of the bottom tabs (Fig. 3)
W
Install with the specified assignment of
stand brackets depending on the steel pa-
nel radiator's length (BL) (Fig. 4). Stand bra-
cket type 12 Vplus is designed for the valve
end of the radiator.
2.2 Pre-assembly of the stand bracket
type 12 Vplus
W
Pre-install stand bracket (Fig. 5, 6, 7).
EN – Manufacturer notes