User Manual V3.1
6
Described behavior is based on Keros firmware 4.0, it can be modified in newer firmwares.
7
Problems
Problem
Cause
How to fix?
The LEDs never turn on
The Wirnet™ iFemtoCell is not well powered
•
Check the position/good connection of the power supply jack
connector
•
Check that the power supply is properly connected to the
mains supply
No LoRa data received
The LoRa antenna is not well connected
•
Check
that a LoRa endpoint is within range of the Wirnet™
iFemtoCell
•
Check the tightening of the LoRa antenna (SMA connector)
•
Check that the LoRa antenna is not deteriorated
No Internet access
No technology to access Internet is
activated/available on the Wirnet™
iFemtoCell
In case of Ethernet connection:
•
Check the position/good connection of the RJ45 Ethernet
connector
•
Check that the RJ45 cable is not deteriorated
In case of Wi-Fi connection:
•
Check that the Wi-Fi access point is within range of the
Wirnet™ iFemtoCell
In case of 3G/4G connection:
•
Check that the USB dongle is well plugged
•
Check that the USB dongle is well supported by firmware
In case of a problem that cannot be resolved immediately from the table, contact your reseller. Do not use the Wirnet™ iFemto
Cell to prevent
further damage.
8
Disposal / Recycling
Do not through out the product with domestic waste. For proper disposal, contact a waste disposal company. The packaging of the product
(cardboard and liners) can be disposed of with the used paper.
9
Warranty
Contact your reseller for warranty conditions of the Wirnet™ iFemt
oCell.
The Wirnet™ iFemtoCell is not warranted by KERLINK in case the enclosure is opened by customer for any reason.
WARNING
i