Solar Controller SRK868V6 Installation and Operation Instructions
http://www.keracontrols.com
7
The Supply Power or the load power should
ONLY be switched ON when the housing of
the controller is CLOSED and secured.
Make sure that the wiring and the enclosure
are not damaged.
If needed, the thin plastic tabs in the wall of the
terminal compartment cover may be broken off
to facilitate routing of the wires
(See Pic. 6)
.
•
Wiring Terminals ( see Pic. 7)
Pic. 7
Abbreviation Function
T1
Solar Collector temperature sensor T1
T2
Tank temperature sensor T2, (Tank bottom)
T3
Tank temperature sensor T3 (Tank top)
T4
(Optional) User Hot Water pipe temperature sensor
3-core wire to Display
3-conductor cable Connection to Control Panel
Power
Power Supply Line
Heating
Output to control the Booster heating H1
▲
T
on
/
▲
T
off
To Solar circulating pump P1
Pipe circulation
To User Hot Water circulating pump P2
Electromagnetic Valve
To activate Tank high temperature protection valve (R1)
Pic. 6
