KEPCO MST 100-2MHT, Руководство оператора

Страница: 10 / 42

1-2
MST-MHT SERIES 071320
.
1.3 SPECIFICATIONS
The MST-MHT Series electrical and mechanical specifications are listed in Tables 1-1 and 1-2.
TABLE 1-1. MST-MHT MODEL PARAMETERS
MODEL
OUTPUT
VOLTAGE
Adjustment
Range
(V d-c)
OVERVOLTAGE
(V d-c)
OUTPUT CURRENT
Maximum (Amps)
RIPPLE/NOISE
EFFICIENCY
(100% Load
120V a-c)
Programmable
(max.)
Hardware
Trigger
(See Note)
45 ° C 55 ° C 65 ° C mV rms mV p-p
MST 6-20MHT 0-6 7.2 7.4 20 16 12 2 5 51%
MST 15-12MHT 0-15 18 18.3 12 9.6 7.2 3 7 61%
MST 25-8MHT 0-25 30 30.6 8 6.4 4.8 4 8 62%
MST 36-5MHT 0-36 42 42.8 5 4.0 3.0 5 10 63%
MST 55-3.5MHT 0-55 66 67.3 3.5 2.8 2.1 9 15 64%
MST 75.2.5MHT 0-75 90 91.8 2.5 2.0 1.5 12 20 64%
MST 100-2MHT 0-100 120 122.4 2.0 1.6 1.2 15 35 66%
MST 150-1.2MHT 0-150 180 183.6 1.2 1.0 0.7 20 45 66%
NOTE: Minimum 2% above Programmable (max.),
TABLE 1-2. MST-MHT GENERAL SPECIFICATIONS
SPECIFICATIONS RATING/DESCRIPTION CONDITION
INPUT
A-C Voltage
nominal 100-250V a-c Single phase
range 90-264 Va-c Brownout Voltage

85Vrms
Frequency
nominal 50-60 Hz At >63 Hz, input leakage current
exceeds specifications
range 47 – 63 Hz (400 Hz)
Input Current maximum 3.6A rms 90V a-c Input
Current Harmonics Within EN 61000-3-2 limits Any source condition, rated load
Efficiency minimum See Model Table 1-1 120V a-c, rated output Load
EMI FCC Class A, CISPR 11 Class A Conducted Emissions
Leakage Current
120V a-c,
60Hz
<0.5 mA
240V a-c,
50Hz
<1.0 mA
Power Factor 0.98 min. All source conditions, full load
EMC Complies with IEC 61326-1, Class A
OUTPUT
Source Effect Voltage 0.001%
90 – 132, 176 – 264V a-c,
any load condition
Current 0.005%
Load Effect
Voltage ±0.002% or 1mV, whichever is greater
10% to 100% Load at EMAX,
any source condition
Current ±0.005% 10% to 100% Load at IMAX
Temperature Effect Voltage 0.01%/ °C
Any source/load condition
(0 – 45 ° C)
Current 0.02%/ °C