KEPCO KLN 100-7.5 Скачать руководство пользователя страница 81

Страница: 81 / 86

KLN 750W 121912

B-7

B.35 SYSTem:COMMunicate:LAN:GATEway COMMAND

SYST:COMM:LAN:GATE

Syntax:

Short Form: SYST:COMM:LAN:GATE <address>
Long Form: SYSTem:COMMunicate:LAN:GATEway <address>

Description:

Sets a static default gateway address to be used during communication via the LAN inter-
face.

This command is invalid if DHCP is enabled (on).

Argument:

<address> is text format xxx.xxx.xxx.xxx

Example:

SYST:COMM:LAN:GATE 192.168.0.1 assigns the static default gateway address to be
192.168.0.1.

B.36 SYSTem:COMMunicate:LAN:GATEway?

QUERY

SYST:COMM:LAN:GATE?

Syntax:

Short Form: SYST:COMM:LAN:GATE? Long Form: SYSTem:COMMunicate:LAN:GATEway?

Description:

Indicates static default gateway address to be used during communication via the LAN
interface.

Return Format: <address> is text format xxx.xxx.xxx.xxx
Example:

SYST:COMM:LAN:GATE? returns 192.168.0.1 (static default gateway address).

B.37 SYSTem:COMMunicate:LAN:IP COMMAND

SYST:COMM:LAN:IP

Syntax:

Short Form: SYST:COMM:LAN:IP <address>
Long Form: SYSTem:COMMunicate:LAN:IP <address>

Description:

Sets the IP address for communication via the LAN interface.

Changing this address requires

that power to the KLN 750W be cycled off, then on.

Argument:

<address> is text in the format xxx.xxx.xxx.xxx

Example:

SYST:COMM:LAN:IP 192.168.0.100 sets the IP address to 192.168.0.100.

B.38 SYSTem:COMMunicate:LAN:IP?

QUERY

SYST:COMM:LAN:IP?

Syntax:

Short Form: SYST:COMM:LAN:IP?

Long Form: SYSTem:COMMunicate:LAN:IP?

Description:

Indicates IP address assigned for communication vi the LAN interface.

Return Format: <address> is text in the format xxx.xxx.xxx.xxx
Example:

SYST:COMM:LAN:IP? returns 192.168.0.100 to indicate the IP address is set to 192.168.0.100.

B.39 SYSTem:COMMunicate:LAN:IPADdress COMMAND

SYST:COMM:LAN:IPAD

Syntax:

Short Form: SYST:COMM:LAN:IPAD <address>
Long Form: SYSTem:COMMunicate:LAN:IPADdress <address>

Description:

Sets the static IP address for communication via the LAN interface.

Changing this address

requires that power to the KLN 750W be cycled off, then on.

Argument:

<address> is text in the format xxx.xxx.xxx.xxx

Example:

SYST:COMM:LAN:IPAD 192.168.0.100 sets the static IP address to 192.168.0.100.

B.40 SYSTem:COMMunicate:LAN:IPADdress?

QUERY

SYST:COMM:LAN:IPAD?

Syntax:

Short Form: SYST:COMM:LAN:IPAD? Long Form: SYSTem:COMMunicate:LAN:IPADdress?

Description:

Indicates IP static address assigned for communication via the LAN interface.

Return Format: <address> is text in the format xxx.xxx.xxx.xxx
Example:

SYST:COMM:LAN:IPAD? returns 192.168.0.100 to indicate the static IP address is set to
192.168.0.100.

Содержание KLN 100-7.5























































































Результаты поиска

Содержание KLN 100-7.5

Отзывы:

Похожие инструкции для KLN 100-7.5

Бренды по названию

Популярные бренды

KEPCO KLN 100-7.5, Руководство оператора

Результаты поиска

Содержание KLN 100-7.5

Отзывы:

Похожие инструкции для KLN 100-7.5

Бренды по названию

Популярные бренды