KEPCO, INC.
131-38 SANFORD AVENUE
FLUSHING, NY. 11355 U.S.A.
TEL (718) 461-7000
FAX (718) 767-1102
www.kepcopower.com
email: [email protected]
081721
228-1532 REV 16
7
IV — SPECIFICATIONS (C, T, X, Y) - CONTINUED
STABILIZATION:
Source Effect (full load):
Range: 90-132V a-c or 170-265V a-c
0.2% typ.; 0.3% max.
Load Effect (10% to 100% load change):
0.5% typ.; 1.5% max.
Temperature Effect: 0.5% typ.; 1.0% max.
Range: –10° to 71°C
Combined Effect: 0.9% typ.; 1.8% max. (includes
source, load, and temperature effects).
Time Effect (1/2 hr-8 hr at 25°C):
0.2% typ.; 0.5% max.
RECOVERY CHARACTERISTICS:
A step load
change from 50% to 100% produces less than +4% output
excursion. Recovery occurs to 1% of the original
setting in <1 ms (load change t
r
or t
f
equal to or greater
than 50
sec).
START-UP TIME:
500 ms. max, 400 ms typ. (100V a-c)
300 ms. max, 200 ms typ. (240V a-c)
HOLDUP TIME:
30 ms. typ., 20 ms. min.
DIELECTRIC STRENGTH:
Between input and output:
2KV a-c for one minute
Between input and case (ground):
2KV a-c for one minute.
Between output and case (ground):
[500V a-c for one minute, cutout current 20 mA]
INSULATION RESISTANCE:
Between input and
ground, output and ground, input and output:
100 Megohms min. (500V d-c).
LEAKAGE CURRENT
0.45mA max. (IEC 950 and UL1950, 120V a-c)
0.6mA max. (IEC 950 and UL1950, 240V a-c).
SAFETY:
Units are designed to meet UL60950 3rd [1st]
Edition, CSA 22.2 No. 60950 and EN 60950 and are CE
marked per the Low Voltage Directive (LVD), 73/23/EEC
and 93/68/EEC. The standards do not apply with DC input
operation.
EMI:
Designed to meet FCC Class B (100-120V a-c) and
EN 50082-2.
VIBRATION:
(non-operating, one hour on each one of
the three axes):
5-10 Hz, 10 mm amplitude.
10-55 Hz, 2g acceleration.
SHOCK:
(non-operating, one-half sinusoidal pulse, three
shocks to each axis):
Acceleration: 60g
Duration: 11ms +5ms
OPERATING TEMPERATURE:
See Figure 4.
STORAGE TEMPERATURE:
-30
o
C to +75
o
C.
RELATIVE HUMIDITY:
Operating and storage:
up to 95% (wet bulb temp. <35
o
C non-condensing).
FUSE:
Slow Blow, 2A, 250V; (5 x 20 mm),
Littelfuse, P/N 215002PG;
Kepco P/N 541-0137.
DIMENSIONS:
See Figure 6.
WARRANTY:
5 years.
