2
228-1158
080502
KEPCO, INC.
"
131-38 SANFORD AVENUE
"
FLUSHING, NY. 11352 U.S.A.
"
TEL (718) 461-7000
"
FAX (718) 767-1102
http://www.kepcopower.com
"
email: [email protected]
HOLD-UP TIME:
20 ms. typ. (120V a-c), 15 ms. min (100V a-c).
DIELECTRIC STRENGTH:
Between input and output: 2KV a-c for one minute.
Between input and output with Y-capacitor removed: 3.0KV a-c for one minute.
Between input and case (ground): 2.0KV a-c for one minute.
INSULATION RESISTANCE:
Between input and ground, output and ground, input and output;
100 Megohms min. (500V d-c).
LEAKAGE CURRENT
(UL method, 120V a-c, 50-60Hz, single terminal connection): 0.5 mA maximum.
(VDE method, 240V a-c, two terminal connection): 0.75 mA maximum.
SAFETY:
UL 1950 recognized (ambient temperature 40° C maximum); CSA E.B. 1402C Level 3 Certified (FAW 48-2K Level 1 Certified);
IEC 950 Approved by TÜV Rheinland (based on EN 60950/09.87, ambient temperature 50° C max.) - cover removed.
(+) SENSE, (–) SENSE:
See Figure 3. These terminals are provided to compensate for voltage drops in the load connecting wires. The
Sense terminals must be connected to their respective (+) and (–) output terminals, either at the load or at the Power Supply output termi-
nals. The connection ensures the most accurate error tracking. Error compensation in the connecting wires is up to 0.25 Volts for the FAW
5-20K model, and up to 0.4 Volts for all other models.
“POWER OK” SIGNAL OUTPUT:
The unit supplies a “POWER OK” logic 1 signal at CP51 (see Figure 2 and Figure 4, View “A”).
CONNECTOR TYPES:
Refer to the Mechanical Outline Drawing. The mating connector for CP51 is a Panduit, P/N CT10F22-2: Cover,
P/N TC100F-2.
CONNECTOR KIT:
Kepco furnishes an optional connector kit with the specified connector listed above. The kit may be ordered under
Kepco Model Kit P/N 518-0029. The connector is provided with 1 meter length leads for trimming to desired lengths.
EMI:
Designed to meet FCC Class B (100-120V a-c) and VDE 0871 Class B (220-240V a-c).
VIBRATION:
(non-operating, one hour on each one of the three axes):
5-10 Hz, 10 mm amplitude.
10-55 Hz, 2g acceleration.
SHOCK:
(non-operating, one-half sinusoidal pulse, three shocks to each axis):
Acceleration: 20g
Duration: 11ms +5ms
OPERATING TEMPERATURE:
0 - 71° C (see Figure 1).
STORAGE TEMPERATURE:
–40
o
C to +75
o
C.
OPERATING AND STORAGE RELATIVE HUMIDITY:
up to 95% (wet bulb temp. <35
o
C non-condensing).
MOUNTING SCREW:
No. 4-40 UNC Thread (see Figure 4)
MAXIMUM SCREW PENETRATION:
0.197 in. (5mm) max.
WEIGHT:
2.20 lbs. (1.0Kg max.), 3.31 lbs. (1.5 Kg max. with cover).
DIMENSIONS:
3.74 in. (95mm) H x 1.38 in. (35mm) W x 7.87 in. (200 mm) L
CASE DIMENSIONS:
3.74 in. (95mm) H x 1.50 in. (38mm) W x 7.87 in. (200 mm) L
FRAME MATERIAL:
Aluminum
FUSE:
Quick acting 5.0A, 250V; (5.2 x 20mm), San-O P/N EQ5.0A; Kepco P/N 541-0112.
WARRANTY:
1 year.
