background image

 

 

- 3 - 

PLASMA 100 Operating Manual

 

STATEMENT OF WARRANTY 

LIMITED WARRANTY:

 "KENZO" warrants to customers of its authorized distributors hereafter "KENZO" that its products will be 

free of defects in workmanship or material. Should any failure to conform to this warranty appear within the time period 

applicable to the KENZO products as stated below, KENZO shall, upon notification thereof and substantiation that the product 

has been stored, installed, operated, and maintained in accordance with KENZO’s specifications, instructions, 

recommendations and recognized standard industry practice, and not subject to misuse, repair, neglect, alteration, or accident, 

correct such defects by suitable repair or replacement, at KENZO ‘s sole option, of any components or parts of the product 

determined by KENZO to be defective. 

 

The KENZO COMPANY MAKES NO OTHER WARRANTY, EXPRESS OR IMPLIED. THIS WARRANTY IS EXCLUSIVE AND 

IN LIEU OF ALL OTHERS, INCLUDING, BUT NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY OR FITNESS 

FOR ANY PARTICULAR PURPOSE. 

 

LIMITATION OF LIABILITY:

 KENZO shall not under any circumstances be liable for special, indirect or consequential 

damages, such as, but not limited to, lost profits and business interruption. The remedies of the Purchaser set forth herein are 

exclusive and the liability of KENZO with respect to any contract, or anything done in connection therewith such as the 

performance or breach thereof, or from the manufacture, sale, delivery, resale, or use of any goods covered by or furnished by 

KENZO whether arising out of contract, negligence, strict tort, or under any warranty, or otherwise, shall not, except as 

expressly provided herein, exceed the price of the goods upon which such liability is based. No employee, agent, or 

representative of KENZO is authorized to change this warranty in any way or grant any other warranty. 

 

PURCHASER'S RIGHTS UNDER THIS WARRANTY ARE VOID IF REPLACEMENT PARTS OR ACCESSORIES ARE USED 

WHICH IN KENZO’S SOLE JUDGEMENT MAY IMPAIR THE SAFETY OR PERFORMANCE OF ANY KENZO PRODUCT. 

PURCHASER'S RIGHTS UNDER THIS WARRANTY ARE VOID IF THE PRODUCT IS SOLD TO PURCHASER BY 

NON-AUTHORIZED PERSONS. 

 

The warranty is effective for the time stated below beginning on the date that the authorized distributor delivers the products to 

the Purchaser. Not with standing the foregoing, in no event shall the warranty period extend more than the time stated plus one 

year from the date KENZO delivered the product to the authorized distributor. 

 
POWER SUPPLIES

                                                           

POWER SUPPLIES & WIRE FEEDERS 

MAIN POWER MAGNETICS (STATIC& ROTATING) 

 

 

 

1YEAR 

ORIGINAL MAIN POWER RECTIFIER 

 

 

 

1YEAR 

POWER SWITCHING SEMI-CONDUCTORS & CONTROL PC BOARD 

 

 

 

1YEAR 

ALL OTHER CIRCUITS AND COMPONENTS INCLUDING 

 

 

 

1YEAR 

 

BUT NOT LIMITED TO, CONTACTORS, RELAYS, 

 

SOLENOIDS, PUMPS, SWITCHES, MOTORS 

 

Warranty repairs or replacement claims under this limited warranty must be submitted to KENZO by an authorized KENZO 

repair facility within thirty (30) days of purchaser’s notice of any Warranty Claim. No transportation costs of any kind will be paid 

under this warranty. Transportation charges to send products to an authorized warranty repair facility shall be the responsibility 

of the Purchaser. All returned goods shall be at the Purchaser’s risk and expense. This warranty supersedes all previous 

KENZO warranties. 

Содержание PLASMA 100






















Отзывы: