STEP #3
Countertop Preparation
Please read this section prior to making cutout for cook top.
It is important to plan ahead for installation of the cook top, keeping the following dimen-
sions in mind (please refer to Figure A).
A - 13 inches maximum depth of overhead cabinets
%LQFKHVLVPLQLPXPKHLJKWRIFRXQWHUWRSDERYHÀRRU
&7KHPLQLPXPÀDWFRXQWHUWRSVXUIDFHWKDWWKHFRRNWRSZLOO
rest upon must be equal to or greater than the overall cook
top dimensions (refer to the following page for overall cook
top dimensions).
D - 30 inches minimum clearance between the top of the cooking
surface and the bottom of an unprotected wood or metal
cabinet or 24 inch minimum clearance when the bottom of
wood or metal cabinet is protected by not less than 1/4-inch-
WKLFN ÀDPH UHWDUGDQW PLOOERDUG FRYHUHG ZLWK QRW OHVV WKDQ
No. 28 MSG sheet steel, 0.015-inch-thick stainless steel,
0.024-inch-thick aluminum or 0.020-inch-thick-copper.
E - 1-inch minimum from backsplash of countertop to edge
of glass (refer to the following page for overall cook top
dimensions).
“Do Not Install Closer Than 1/2 Inch (12 mm) From Any
Adjacent Surface”, and
NE PAS INSTALLER A’MDINS DE
12MM DETOUTE SURFACE ADJACENTE.
Warning: To eliminate the risk of burns by reaching over
KHDWHGVXUIDFHXQLWVFDELQHWVWRUDJHVSDFHORFDWHGDERYH
surface units should be avoided. If cabinet storage is to be
SURYLGHGWKHULVNFDQEHUHGXFHGE\LQVWDOOLQJDUDQJHKRRG
that projects horizontally a minimum of 5” beyond the bottom
of the cabinets.
Before making the countertop cutout, check for clearance. Check to see if the cook top will
clear the front and side walls of the base cabinet. It is also important to provide enough
ventilation.
Adequate ventilation of the space below the
countertop must be provided to ensure proper
operation of the cook top. Heat transferred from
the cook top bottom pan during operation will
overheat an improperly ventilated area.
3
Fig. B
Fig. A
Содержание Alpine
Страница 2: ......
