Kenworth K270, Руководство по культуризму, Страница: 6 / 96

iv
Figures
Figure 5-6. Rubber Spacer Between Brackets ......................................................................................................... 5-5
Figure 5-7. Hole Locations Guidelines for Frame Rail and Bracket ....................................................................... 5-5
Figure 5-8. Crossmember-Gusset Hole Pattern Requirements. [inch(mm)] ........................................................... 5-6
Figure 5-9. Acceptable U-Bolt Mounting with Wood and Fabricated Spacers ...................................................... 5-7
Figure 5-10. Clearance Space for Air Lines and Cables ......................................................................................... 5-7
Figure 5-11 Example of Fishplate Bracket at Rear End of Body, used with U-Bolts ............................................. 5-8
Figure 6-1. Detail of Frame ..................................................................................................................................... 6-2
Figure 6-2. Frame Insert Extension and Joint Welding ........................................................................................... 6-2
Figure 6-3 Comparison of Original, Shortened, and Extended Wheelbases. .......................................................... 6-4
Figure 6-4. Crossmember Added When Distance Exceeds 60 Inches (1524 mm) ................................................. 6-4
Figure 7-1. Instrument Layout ................................................................................................................................. 7-2
Figure 7-2. Data Bus Communication Architecture ................................................................................................ 7-3
Figure 7-2. Data Bus Communication Architecture ................................................................................................ 7-3
Figure A-2. Drivers Door and Door Frame Label .................................................................................................. A-2
Figure A-
3. Engine Identification Location ........................................................................................................... A-3
Figure A-
4. Front Axle Identification ..................................................................................................................... A-4
Figure A-
5. Rear Axle Identification ...................................................................................................................... A-4
Figure B-1. Balanced Load: CGf 100 in. from front axle ....................................................................................... B-2
Figure B-2. Unbalanced Load: CGf 133 In. From Front Axle ................................................................................ B-3
Figure B-3. Balanced Body Unloaded: CGf 184.7 in. (4691.45 mm) from front axle. .......................................... B-5
Figure B-4. Liftgate Example: CGf 322.2 in (8183.9 mm) from front axle. .......................................................... B-5