manualshive.com logo in svg

Kenwood XD-501, Инструкция по эксплуатации

Поделиться
Скачать
Kenwood XD-501 Скачать руководство пользователя страница 62

XD-SERIES (En)

62

Preparation section

Basic section

Application section

Knowledge sections

Remedy

Cause

Symptom

CD player

÷

Place the disc properly, with the label side
facing upward.

÷

Place the disc properly.

÷

Clean the disc referring to “Disc handling
precautions”.

÷

Try another disc.

÷

Refer to “Caution on condensation” and
remove the condensation by evaporation.

÷

Place a disc in the CD player.

÷

Press the play key.

÷

Clean the disc referring to “Disc handling
precautions”.

÷

Try another disc.

÷

Clean the disc referring to “Disc handling
precautions”.

÷

Try another disc.

÷

Install the unit in a place not subject to
vibrations.

A CD is placed in the player but it cannot
be played.

Sound is not produced.

Sound skips.

÷

The disc is placed upside down.

÷

The disc position is displaced.

÷

The disc is extremely dirty.

÷

The disc is scratched.

÷

Dew is condensed on the optics lens.

÷

The disc has not been placed.

÷

The player is not put to the play mode.

÷

The disc is extremely dirty.

÷

The disc is scratched.

÷

The disc is dirty.

÷

The disc is scratched.

÷

The player is subject to vibration.

™

™

5

O

™

™

5

5

In case of difficulty

÷

Use a cassette with an unbroken recording
protect tab or block the hole.

÷

Close the holder completely.

÷

Select the source to be recorded with the
input selector key.

÷

Change the tape transport direction of deck
B or reverse the tape insertion orientation.

÷

Fully turn the 

MIC VOL.

 control knob to the

left.

Recording cannot be started by pressing
the record key.

Volume of the recorded track changed.

÷

The recording protect tab of the cassette
has been broken.

÷

The cassette holder is not closed com-
pletely.

÷

The 

TAPE

 input is selected.

÷

The tape is fully wound to one of the reels.

÷

MIC VOL.

 control knob is moved during

recording.

5

¢

⁄

º

º

WARNING NOTICE:

IN MOST CASES IT IS AN INFRINGEMENT OF COPYRIGHT TO
MAKE COPIES OF TAPES OR DISCS WITHOUT THE PERMISSION
OF THE COPYRIGHT OWNERS. ANYONE WISHING TO COPY COM-
MERCIALLY AVAILABLE TAPES OR DISC SHOULD CONTACT THE
MECHANICAL COPYRIGHT PROTECTION SOCIETY LIMITED OR
THE PERFORMING RIGHTS SOCIETY LIMITED.

Содержание XD-501

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды